TLB重量变送器(RS485 )-意大利laumas

【 意大利Laumas TLB重量变送器】保证货期快捷，原装进口,一手货源渠道，直接韩国采购，绝对的价格优势和贴心的售后服务。意大利LaumasTLB重量变送器优势供应！

产品品牌：意大利Laumas重量变送器， Laumas重量变送器

产品名称：TLB重量变送器

产品价格：在线询价

TLB重量变送器产品特点：

强大的通讯功能：自带RS485通讯接口，可选PROFIBUS、PROFINET、DEVICENET、MODBUS、ETHERNET通讯协议

可同时驱动8个350Ω的传感器

外观尺寸：25x115x120mm

采用6位发光二极管显示，字高8毫米

快速的A/D讯号转换：高达每秒 300 次转换

高精度 超过 24bits(16 000 000) 以上个刻度

线性/模拟输出的线性度：<0.01%F.S

显示范围： -999999 ～ +999999

全数字化设定输入，调整校正，非砝码标定

具有4-20mA、0-20mA、0-10V、0-5V、-5-+5V、-10-+10V 多种模拟量输出标准

含有2个数字量输入及3个数字量输出接口，可方便的自定义其用途

全数位化功能参数设定即自动调整校正零点及重量;

轻巧简洁的外型可轻易地安装于 DIN 导轨上

• Weight transmitter/indicator with six-digit red LED display (8 mm height). Space saving compact design. Four buttons for the system calibration. Six indicator led. Dimensions: 25 x 115 x 120 mm.
• RS485 port (Modbus RTU/Laumas ASCII protocol)
• 2 logic inputs, 3 relay outputs
• OIML R76:2006 approved, class III, 10000 divis. 0.2μV/VSI
• OIML R61 - WELMEC Guide 8.8:2011 (M.I.D.)
• Back panel mounting on Omega/DIN rail
• A/D converter 24bit (16000000 points) 4.8 kHz
• Display range 999999
• European Community registered design.

TLB重量变送器产品技术参数：

TECHNICAL FEATURES：

METROLOGICAL SPECIFICATIONS OF TYPE-APPROVED INSTRUMENTS

MAIN FUNCTIONS

• Connections to:
  • PLC via analog output or fieldbuses;
  • PC/PLC via RS485 (up to 99 instruments with line repeaters, up to 32 without line repeaters);
  • remote display via RS485;
  • up to 8 load cells in parallel by junction
• Digital filter to reduce the effects of weight
• Theoretical calibration (via keyboard) and real calibration (with sample weights and the possibility of weight linearization up to 5 points).
• Tare weight zero
• Automatic zero setting at power-on.
• Gross weight zero
• Semi-automatic tare (net/gross weight) and preset
• Semi-automatic
• Displaying of the maximum weight value reached (peak).
• Direct connection between RS485 and RS232 without
• Hysteresis and setpoint value
• TCP/IP WEB APP

Integrated software in combination with the Ethernet TCP/IP version

for remote supervision, management and control of the instrument.

CE-M version: 2014/31/EU-EN45501:2015-OIML R76:2006

• System parameters management protected by qualified access via software (password), hardware or
• Weight subdivisions displaying (1/10 e).
• Two operation mode: single interval or multi-interval.
• Net weight zero

DESCRIPTION

	RS485 serial port. Baud rate: 2400, 4800, 9600, 19200, 38400, 115200 (bit/s).	TLB485
	Optoisolated 16 bit analog output. Current: 0÷20 mA; 4÷20 mA (up to 300 Ω). Voltage: 0÷10 V; 0÷5 V; ±10 V; ±5 V (min 10 kΩ). Equipped with RS485 serial port.	TLB
	CANopen port. Baud rate: 10, 20, 25, 50, 100, 125, 250, 500, 800, 1000 (kbit/s). The instrument works as slave in a synchronous CANopen network. Equipped with RS485 serial port.	TLBCANOPEN
	DeviceNet port. Baud rate: 125, 250, 500 (kbit/s). The instrument works as slave in a DeviceNet network. Equipped with RS485 serial port.	TLBDEVICENET
	CC-Link port. Baud rate: 156, 625, 2500, 5000, 10000 (kbit/s). The instrument works as Remote Device Station in a CC-Link network and occupies 3 stations. Equipped with RS485 serial port.	TLBCCLINK
	PROFIBUS DP port. Baud rate: up to 12 Mbit/s. The instrument works as slave in a Profibus-DP network. Equipped with RS485 serial port.	TLBPROFI
	Modbus/TCP port. Type: RJ45 10Base-T or 100Base-TX (auto-sensing). The instrument works as slave in a Modbus/TCP network. Equipped with RS485 serial port.	TLBMODBUSTCP
	Ethernet TCP/IP port. Type: RJ45 10Base-T or 100Base-TX (auto-sensing). The instrument works in an Ethernet TCP/IP network and it is accessible via web browser. Equipped with RS485 serial port.	TLBETHETCP
	2x Ethernet/IP ports. Type: RJ45 10Base-T or 100Base-TX (auto-sensing). The instrument works as adapter in an Ethernet/IP network. Equipped with RS485 serial port.	TLBETHEIP
	2x PROFINET IO ports. Type: RJ45 100Base-TX. The instrument works as device in a Profinet IO network. Equipped with RS485 serial port.	TLBPROFINETIO
	2x EtherCAT ports. Type: RJ45 10Base-T or 100Base-TX (auto-sensing). The instrument works as slave in an EtherCAT network. Equipped with RS485 serial port.	TLBETHERCAT
	2x POWERLINK ports. Type: RJ45 10Base-T or 100Base-TX (auto-sensing). The instrument works as slave in a Powerlink network. Equipped with RS485 serial port.	TLBPOWERLINK
	2x SERCOS III ports. Type: RJ45 10Base-T or 100Base-TX (auto-sensing). The instrument works as slave in a Sercos III network. Equipped with RS485 serial port.	TLBSERCOS

TLB 485

重量变送器/指示器，带六位红色LED显示屏(8 mm高)。 节省空间的紧凑设计。 用于系统校准的四个按钮。 六项指标领先。 尺寸：25 x 115 x 120 mm。

• RS485端口(Modbus RTU / Laumas ASCII协议)
• 2个逻辑输入，3个继电器输出
• OIML R76：2006年批准，III级，10000 divis。0.2μV/ VSI
• OIML R61 - WELMEC指南8.8：2011(M.I.D。)
• 背板安装在Omega / DIN导轨上
• A / D转换器24位(16000000点)4.8 kHz
• 显示范围999999
• 欧洲共同体注册设计。

TLB CANOPEN

重量变送器/指示器，带六位红色LED显示屏(8 mm高)。 节省空间的紧凑设计。 用于系统校准的四个按钮。 六项指标领先。 尺寸：25 x 115 x 120 mm。

• CANopen端口
• RS485端口(Modbus RTU / Laumas ASCII协议)
• 2个逻辑输入，3个继电器输出
• OIML R76：2006年批准，III级，10000 divis。0.2μV/ VSI
• OIML R61 - WELMEC指南8.8：2011(M.I.D。)
• 背板安装在Omega / DIN导轨上
• A / D转换器24位(16000000点)4.8 kHz
• 显示范围999999

TLB DEVICENET

重量变送器/指示器，带六位红色LED显示屏(8 mm高)。 节省空间的紧凑设计。 用于系统校准的四个按钮。 六项指标领先。 尺寸：25 x 115 x 120 mm。

• DeviceNet端口
• RS485端口(Modbus RTU / Laumas ASCII协议)
• 2个逻辑输入，3个继电器输出
• OIML R76：2006年批准，III级，10000 divis。0.2μV/ VSI
• OIML R61 - WELMEC指南8.8：2011(M.I.D。)
• 背板安装在Omega / DIN导轨上
• A / D转换器24位(16000000点)4.8 kHz
• 显示范围999999

TLB CC-LINK

重量变送器/指示器，带六位红色LED显示屏(8 mm高)。 节省空间的紧凑设计。 用于系统校准的四个按钮。 六项指标领先。 尺寸：25 x 115 x 120 mm。

• CC-Link端口