产品分类

产品分类

PS for load cells FTP 3000-5000; FTK 3000-5000; FTZ 5000

PS10T for load cells FTP 10000

Hot worked galvanized mounting kit designed for silos, mixing machines, tanks, hoppers subject to vibrations because of parts in motion. Provided with a ball joint, adjustable height, against lateral forces and anti-tilt to compensate for misalignment of the support plates.

Max static load 5000/10000 kg.

PS 用于称重传感器FTP 3000-5000; FTK 3000-5000;FTZ 5000

PS10T用于称重传感器FTP 10000

PS称重模块:热镀锌安装套件,设计用于筒仓,混合机,储罐,料斗,这些零件因运动中的零件而受到振动。配有球形接头,高度可调,可抵抗侧向力和防倾斜,以补偿支撑板的不对中。

最大静载荷5000/10000千克

Series laod cells:FTP - FTZ - FTK

Application range from 3000 to 10000 kg

DESCRIPTION

Hot worked galvanized (PS) or AISI 304 stainless steel (PS10T) upper plate.

Lower plate and block in hot worked galvanized.

Constraint against lateral forces and anti-tilt by ball-and-socket joint.

Misalignment compensation of the support plates structure.

Adjustable height.

DIMENSIONS AND TECHNICAL SPECIFICATIONS

Interconnect the plates to the earthing.

In case of structure with four-point support, proceed to the height adjustment, if one-point does not in contact with the upper part of the mounting kit.

PS称重模块描述

热加工镀锌(PS)或AISI 304不锈钢(PS10T)上板。

下模板和砌块热加工镀锌。

通过球窝关节来约束侧向力和防止倾斜。

支撑板结构失配补偿。

可调节高度。

PS称重模块尺寸及技术规格

把金属板与接地线连接起来。

如果是四点支承的结构,如果一点没有接触到安装组件的上部,则进行高度调整。

百度分享

关闭