GENERAL FEATURES
PVCLS
Stainless steel mounting kit designed for rollers, platforms, tanks, hoppers, etc..; provided with a self-centring joint foot, adjustable height, against lateral forces and anti-tilt to compensate for misalignment of the support plates.
Max static load 2000 kg.
一般特征
意大利laumas PVCLS称重模块
不锈钢安装套件,适用于轧辊,平台,罐,料斗等;具有自定心的关节脚,高度可调,抗侧力和抗倾斜,以补偿不正确的支持板。
最大静负荷2000kg。
PVCLS称重模块报价货期:联系客服咨询
DESCRIPTION
Adjustable upper plate in AISI 304 stainless steel (PPV).
AISI 304 stainless steel lower plate.
Constraint against lateral forces and anti-tilt by in stainless steel self-centring joint foot.
Misalignment compensation of the support plates structure.
Adjustable height.
DIMENSIONS AND TECHNICAL SPECIFICATIONS
Finished the installation by means of a copper wire, connect the upper supporting plate with the lower supporting plate, then connect all the lower plates to the earthing system.
In case of structure with four-point support, if one-point does not touch the support base of the foot, you must proceed to adjust foot height.
PVCLS称重模块描述
可调上板采用AISI 304不锈钢(PPV)。
AISI 304不锈钢下板。
通过不锈钢自定心连接脚来约束侧向力和防止倾斜。
支撑板结构失配补偿。
可调节高度。
PVCLS称重模块尺寸及技术规格
用铜线完成安装,将上支承板与下支承板连接,再将下支承板全部连接到接地系统上。
如果是四点支撑的结构,如果一点没有碰到脚的支撑底座,必须继续调整脚的高度。
下面这些产品,一样很精彩哟!
产品繁多,总有一款适合你,更可来图来样定制生产,选型!【仪器仪表网】专业供应意大利Laumas JOLLY2/4称重仪表,意大利Laumas JOLLY2/4称重仪表,【 意大利Laumas JOLLY2/4称重仪表】保证货期快捷,100%原装进口,一...
产品名称:AU单点式称重传感器 产品型号:AU-3Kg、 AU-6Kg、AU-15Kg、AU-30Kg、 AU-50Kg 产品品牌:Laumas称重传感器 意大利LAUMAS称重传感器 ...
产品名称:AS单点式称重传感器 产品型号:AS-0.25Kg、AS-0.5Kg、AS-1Kg 产品品牌:Laumas称重传感器 意大利LAUMAS称重传感器 产品类型:意大利...
产品名称:DTX双剪切梁称重传感器 产品型号:DTX-9000Kg、DTX-20klb、DTX-13600Kg、DTX-30klb、DTX-18000Kg、DTX-40klb、DTX-23000Kg、DTX-50klbKg、D...
产品名称:DTL-25000Kg双剪切梁称重传感器 产品型号:DTL-25000Kg 产品品牌:Laumas称重传感器 意大利LAUMAS称重传感器 产品类型:意大利LAUMAS...
GENERAL FEATURES VCOKDTL Galvanized steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrati...
GENERAL FEATURES VDTX Mounting kit constructed of nickel-plated steel alloy; designed for on-board weighing, overhead cranes, silos, mixi...
GENERAL FEATURES V15000称重模块:for cells CBL 15000; CBX 30000 V30000称重模块:for cells CBL 30000; CBX 50000 V100000称重模块:for ce...
GENERAL FEATURES V10000 for cells CBL 250-12500; CBX 15000 V10275 for cells CBL 250-12500; CBX 15000 AISI-304 stainless steel mounting...
GENERAL FEATURES P10000:Lower plate BASESUP:Turned upper base BASEINF:Turned lower base PIASTRA+BASEINF:Turned lower base + Low...
PSCLS2000称重模块 PSCLS传感器 Hot worked galvanized mounting kit designed for silos, mixing machines, tanks, hoppers subject to vibration...
PV80CLS称重模块 Stainless steel mounting kit designed for rollers, platforms, tanks, hoppers, etc..; provided with a stainless steel self-ce...
PS for load cells FTP 3000-5000; FTK 3000-5000; FTZ 5000 PS10T for load cells FTP 10000 Hot worked galvanized mounting kit designed for s...
PPV / PPV80称重模块 FOR SINGLE POINT, BENDING BEAM, SHEAR BEAM AND COMPRESSION LOAD CELLS。
PV80:for load cells FTP 3000-5000; FTZ 5000 PV80Z:for load cells FTK 3000-5000 Mounting kit designed for rollers, platforms, tanks, hop...
以质量求生存,以信誉求发展,满足合同规定及潜在需求!
全国咨询热线
157-6785-5089