UMICORE-化工行业料仓称重

该应用程序是为UMICORE开发的，UMICORE是电镀残留物回收的全球领导者。Umicore Human FuHong Zinc Chemicals年产量为20,000吨，是中国最大的锌粉生产厂。

工程工作由上海日出测量控制公司进行，该公司是SCAIME产品的集成商，专门为工业部门提供称重系统。

它的要求

客户需要称重解决方案来监控10个储存筒仓的填充水平，容量为100吨。由于存在锌粉，筒仓安装在潜在爆炸区域。

称重系统解决方案

10个容量为100t的筒仓安装在四个连接到IPE50指示器的称重传感器上，用于液位监测。

针对每个筒仓的SCAIME解决方案

• 四个CB50X 30t称重传感器
• 四个STABICAN 30t安装套件
• 一个带有齐纳屏障的IPE50指示器
• 针对每个筒仓的SCAIME解决方案

对于每个称重筒仓，我们提供容量为30吨的CB50X称重传感器。这些称重传感器通过了ATEX和IECEx认证，因此可以安装在危险区域。STABICAN安装套件可用于将筒仓转换为一组秤，而无需使用额外的安全设备。称重传感器连接到IPE50重量指示器，可提供高达3000格的精度。

客户利益

一种称重解决方案，非常易于安装并提供高精度

在腐蚀性化学环境中具有高抗性

This application was developed for UMICORE, global leader in galvanisation residue recycling. With an annual capacity of 20,000t, Umicore Human FuHong Zinc Chemicals is the largest Chinese production facility for zinc powder.

The engineering work was conducted by Shanghai Sunrise Measurement& Control, an integrator of SCAIME products specialising in weighing systems for the industrial sector.

Its requirement

The customer needed weighing solutions for monitoring the fill level of 10 storage silos with a capacity of 100t. The silos are installed in a potentially explosive area due to the presence of zinc powder.

Our solution

The 10 silos, with a capacity of 100t, are mounted on four load cells connected to an IPE50 indicator for level monitoring.

SCAIME solution for each of the silos

• Four CB50X 30t load cells
• Four STABICAN 30t mounting kits
• One IPE50 indicator with set of Zener barriers

For each weighing silo, we offered CB50X load cells with a capacity of 30t. These load cells are ATEX and IECEx certified and can therefore be installed in a hazardous zone. The STABICAN mounting kits can be used to transform a silo into a set of scales without using additional safety equipment. The load cells are connected to an IPE50 weight indicator providing precision of up to 3000 divisions.Customer benefit

A weighing solution which is very easy to install and offers a high level of precision

High resistance in aggressive chemical environments