仪器仪表网

专业销售代理进口称重传感器仪器仪表、泵、阀门、世界知名品牌,原装正品,货期短,厂家直供!

全国服务热线157-6785-5089
您所在的位置:

1吨(1t)自重测试机以进行产品校准德国Flintec

来源:仪器仪表网发布时间:2020.03.24 17:17:49 阅读:299

在Flintec,我们的工程师致力于为市场提供最优质的载荷和力测量解决方案。每年我们都会投入大量资金进行研发,以确保我们的产品达到最高的质量和准确性标准。

最近,一项此类投资已从英国Flintec交付给我们位于斯里兰卡科戈拉的先进制造工厂。我们的英国工程师设计并建造了温度可控的1吨自重测试机,用于校准Flintec称重传感器产品。

调试该设备可提供更高的测试精度,这在使用其他负载方式(例如液压)时并不总是可以实现的。自重测试是迄今为止测试称重传感器性能的最稳定,最准确的方法。这台机器将使Flintec将精确定义的静载荷施加到我们的中档容量产品上,从而分5步测量介于100Kg和1000Kg之间的输出。称重模块采用独特的重量传递机制进行设计,可使用每个200Kg重量模块内的预选重量,以5个增量测试高达1吨的容量。该机器可以在5至40度的温度之间进行跨度,滞后,线性和蠕变测试。

机器本身高约3.2米,花了超过400个工时进行设计,制造和调试。

有关Flintec产品的更多信息,请立即联系我们。


Flintec Build A New 1 Tonne Dead Weight Test Machine For Product Calibration

At Flintec, our engineers are committed to delivering the very best quality load and force measurement solutions to the market. Each year we invest heavily into research and development to ensure our products meet the highest standards of quality and accuracy.

One such investment has recently been delivered from Flintec UK to our state of the art manufacturing facility in Koggola, Sri Lanka. Our British engineers designed and built a temperature controlled 1 tonne dead weight test machine to calibrate Flintec load cell products.

This equipment was commissioned to provide greater testing accuracy, which is not always achievable when using other means of load application such as hydraulic. Dead weight testing is by far the most stable and accurate means to test load cell performance. This machine will allow Flintec to apply accurately defined dead loads to our mid-range capacity products to measure output ranging between 100Kg and 1000Kg in 5 stages. The weighing modules have been designed using a unique weight transfer mechanism which allows testing up to 1 Tonne capacity in 5 increments using pre-selectable weights within each 200Kg weight module. The machine allows for span, hysteresis, linearity and creep testing between temperatures of 5 ­ 40 degrees.

The machine itself is approximately 3.2 meters high and took over 400 man hours to design, build and commission.

For further information on Flintec products contact us today.

文章版权备注

文章版权归 仪器仪表网 所有 购买产品联系:15767855089(QQ/微信/手机同号)
文章链接:https://www.shajiangguan.cn/xwzx/14283.html
未经授权,禁止任何站点镜像、采集、或复制本站内容,违者通过法律途径维权到底!
与仪器仪表网合作的

大致流程

全国统一服务热线

157-6785-5089
立即咨询
感谢以下战略合作伙伴十多年来对仪器仪表网的长期支持
Thanks to the following strategic partners for our support
抓紧每一道工序,做好每一件产品 >>>>>>>>
提高售后服务质量 , 提升客户满意程度

以质量求生存,以信誉求发展,满足合同规定及潜在需求!

全国咨询热线

157-6785-5089