SPSZ系列单点不锈钢称重传感器，意大利DINI ARGEO

用于偏心负载的不锈钢称重传感器，适用于构建CE-M认证的秤，带有一个最大尺寸为800x800 mm的称重传感器。

容量(kg)：500,1000。

OIML R60。C3精度等级。

17-4 PH不锈钢。IP68保护。

SPSZ系列主要特点：

• C3 PRECISION CLASS
• OFF CENTER LOAD COMPENSATED
• 采用17-4 PH不锈钢制造
• IP68保护
• MAX。容量从500到1000公斤
• 适用于尺寸高达800 X 800 mm的平台
• 屏蔽连接电缆
• 可根据要求提供测试证书

技术特点

• 最小称重传感器验证间隔：Vmin = EMax / 10.000
• 最大验证间隔数：nLC = 3000
• 满量程输出：2mV / V +/- 10%
• 温度对零的影响：0,01%FS / 10K
• 温度对满量程输出的影响：0,001%FS / 10K
• 补偿温度范围：-10°C / + 40°C
• 工作温度范围：-10°C / + 50°C
• 在30分钟内在标称负载下蠕变：±0.01%FS
• 最大容许激励电压：15 VDC
• 输入电阻：380±15欧姆
• 输出电阻：350±10欧姆
• 绝缘电阻(100V)> 2000 MOhm
• 安全过载：300%FS
• 终极超载：300%FS
• 标称位移：<0.5 mm
• 6线屏蔽电缆，3米长，5毫米直径

安装尺寸图尺寸单位为（mm）：

SPSZ/500kg

SPSZ/1000kg

SPSZ SERIES SINGLE POINT STAINLESS STEEL LOAD CELLS

Stainless steel load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 800x800 mm.

CAPACITIES (kg): 500, 1000.

OIML R60. C3 precision class.

17-4 PH stainless steel. IP68 protection.

MAIN FEATURES

• C3 PRECISION CLASS
• OFF CENTER LOAD COMPENSATED
• MADE IN 17-4 PH STAINLESS STEEL
• IP68 PROTECTION
• MAX. CAPACITIES FROM 500 TO 1000 kg
• FOR PLATFORMS WITH DIMENSIONS UP TO 800 X 800 mm
• SHIELDED CONNECTION CABLE
• TEST CERTIFICATE AVAILABLE UPON REQUEST

TECHNICAL FEATURES

• Minimum load cell verification interval: Vmin = EMax / 10.000
• Maximum number of verification intervals: nLC = 3000
• Full Scale Output: 2mV/V +/- 10%
• Temperature effect on zero: 0,01% FS/10K
• Temperature effect on full scale output: 0,001% FS/10K
• Compensated Temperature Range: -10°C/+40°C
• Operating Temperature Range: -10°C/+50°C
• Creep at nominal load in 30 minutes: ± 0,01% F.S.
• Maximum tolerated excitation voltage: 15 VDC
• Input Resistance: 380 ± 15 Ohm
• Output Resistance: 350 ± 10 Ohm
• Insulation Resistance (100V) >2000 MOhm
• Safe Overload: 300% F.S.
• Ultimate Overload: 300% F.S.
• Nominal displacement: < 0.5 mm
• 6-wire shielded cable, 3m long, 5mm diameter+

其他产品推荐：

NY5-50kg/100kg称重传感器、NS1-100张力传感器、称重显示仪表、XK3190-H2Bb吊钩秤专用仪表、KSR-28T称重传感器、9303-40Klb称重传感器

扩展阅读：

Dini Argeo is a company specialising in the production of weighing systems. With their mechanical, electronic and I.T. knowledge, Dini Argeo offers solutions in the area of mechatronics, ranging from mobile weighing systems to scales for commercial and industrial use. This includes a wide range of components, electronic solutions and software, for industrial automation and systems integration.

Dini Argeo boasts over 100 years of experience in the area of weighing, batching and industrial automation. The company offers state of the art technology, which guarantees the highest levels of precision, keeping to international standards.

In the fall of 2016, Dini Argeo was acquired by Rice Lake Weighing Systems. The two brands' strong history and ideals will increase customers' product and service offering in Europe and around the world.

DINI ARGEO S.r.l.

Via della Fisica, 20

41042 Spezzano di Fiorano Mod.se (MO) - Italy

P.IVA/CF (VAT Reg. No./Tax code) – VAT IT00767800360

CCIAA Modena (Chamber of Commerce of Modena)

Cap. Stock € 500.000,00

Founding Dini Argeo

In 1846, Dini Antonio founded the company in the province of Modena, Italy, an area active in mechanical production. The company began producing weighing equipment for the farming sector.

Turn of the Century

In 1906, Dini Argeo was recognized as a metric manufacturer on the Registro dei Fabbricanti Metrici.

Going Digital

In the 1980s, the arrival of electronics and their application in weighing systems compelled Dini Argeo to begin creating digital weighing systems with hardware and software solutions to satisfy customers’ specific demands for diverse industrial and commercial sectors.

Total Weighing Solutions Provider

Today, Dini Argeo designs and produces weighing systems and components with time-tested quality and exceptional customer service across the world. They are a global leader in the area of mobile, industrial and retail weighing systems.

Becoming a company of Rice Lake

In the fall of 2016, Dini Argeo was acquired by Rice Lake Weighing Systems. The two brands' strong history and ideals will increase customers' product and service offering in Europe and around the world.