JB4接线盒 可接4个测压元件-意大利狄纳乔Dini Argeo

JB4简单的接线盒，IP67保护，4个输入，配有电子板，用于连接2,3或4个称重传感器的信号。螺钉端子板便于连接。保护电路可防止雷击和过电压。降低的成本使其成为静态称重系统的理想选择，例如筒仓，储罐和大容器。

• Simple junction box with IP67 protection and 4 inputs equipped with electronic board for junction of the signals of 2, 3 or 4 load cells. Screw terminal boards to facilitate the connection. The protection circuit protects against lightning and overvoltage. The reduced costs make it the ideal choice for static weighing systems such as silos, tanks and big containers.

JB4接线盒技术特点(TECHNICAL FEATURES):

外壳采用ABS。防护等级:IP67防护等级

• Case in ABS. Protection degree: IP67 protection degree

防护等级IP68,使用GELBOX防凝露凝胶。

• Protection degree IP68 with the use of GELBOX anti condensation gel.

最大输入电压:24Vdc。

• Maximum input voltage: 24Vdc.

最大输入电流:700mA。

• Maximum input current: 700mA.

峰值脉冲电流:15kA。

• Peak pulse current: 15kA.

最大输入称重传感器信号：1000mV

• Maximum input load cell signal: 1000mV.

温度的影响:50 ppm /°C。

• Temperature effect: 50ppm/°C.

尺寸(lxwxh)：120x80x55mm。

• Dimensions (lxwxh): 120x80x55mm.

Available versions

	Code	Description
	JB4	Junction box with up to 4 load cells. ABS box, IP67 protection degree, with 4 + 1 fairleads.

Protection for junction box/electronic circuits

	Code	Description
	GELBOX	(S1) Anti condensation, insulating, and sealing gel. Useful for the protection of the electronic circuits of the weighing system, even in conditions of prolonged immersions in time. Pack of 300ml.

Connection cables

	Code	Description
	LCCB	Shielded 6x0,25 mm² cable (suitable for Ex zones). €/m
	LCCBM	Shielded 4x0,34mmq cable for moving applications. €/m

Similar solutions for ATEX environnements

	Code	Description
	JB4QA	ABS IP67, ATEX, equalisation box for up to 4 cells. 4 + 1 fairleads. Protection modes: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Complete with manual and ATEX CE CONFORMITY DECLARATIONS (available in EN, DE, FR and IT).
	EXCB6	(S6) Shielded, blue, 6x0,22mm² cable, for EX i (2GD) applications. €/m

Similar solutions

	Code	Description
	JC4Q	Equalisation board for up to 4 cells. With UL marked PCB, Terminal block, plastic box and labels (if expected).
	JC10Q	Equalisation board for up to 10 cells, fitted with surge arresters.
	JB10Q	Equalisation box for connection with up to 10 analogue load cells. Reinforced polyester box, with 10 + 1 fairleads. With UL marked PCB, Terminal block, plastic box and labels (if expected).
	DGT4	Transmitter for DIN bar with 4 channels, 2 IN and 2 OUT. 5-key keypad, LED display, and standard weighing programme.

All the specifications and images can be subject to variations and upgrades without prior notice.